Specifications:

• Voltage DC Maximum Voltage: 1000V / Accuracy: ±(0.05%+1) / Maximum Resolution:10 µV
• Voltage AC Maximum Voltage: 1000V / Accuracy: ±(0.7%+2) True RMS / AC Bandwidth 20kHz / Maximum Resolution: 0.1 mV
• Current DC Maximum Amps: 10A (20 A for 30 seconds maximum) / Amps Accuracy: ±(0.2%+2) / Maximum Resolution: 0.01 µA
• Current AC Maximum Amps: 10A (20 A for 30 seconds maximum) / Amps Accuracy: ±(1.0%+2) True RMS / Maximum Resolution: 0.1 µA
• Resistance Maximum Resistance: 50 MΩ / Accuracy: ± (0.2%+1) True RMS  / Maximum Resolution: 0.1Ω
• Capacitance Maximum Capacitance 9,999 µF / Accuracy ±(1%+2) / Maximum Resolution 0.01 nF
• Frequency Maximum Frequency 200 kHz / Accuracy ±(0.005%+1) / Maximum Resolution 0.01 Hz
• Duty Cycle Maximum Duty Cycle 99.9% / Accuracy ±(0.2% per khz +0.1%) / Maximum Resolution 0.1%
• Temperature Measurement, 87 V/E: -200.0°C - 1090°C / -328.0°F - 1994.0°F excluding probe
• 80 BK Temperature Probe -40.0°C - 260°C / -40.0°F - 500°F, 2.2°C or 2% whichever is greater
• Conductance Maximum Conductance 60.00 nS / Accuracy ±(1.0%+10) / Maximum Resolution 0.01 nS
• Diode Range: 3 V / Resolution: 1 mV / Accuracy: ± (2 % + 1)
• Duty Cycle Range Accuracy: Within ± (0.2% per kHz + 0.1 %)

Environmental:

• Operating Temperature -20°C to +55°C
• Storage Temperature -40°C to +60°C
• Humidity (Without Condensation) 0% - 90% (0°C - 35°C) / 0% - 70% (35°C - 55°C)
• Operating Altitude 2000 m

Safety:

• Overvoltage category EN 61010-1 to 1000 V CAT III, 600V CAT IV
• Agency Approvals UL, CSA, TÜV, VDE listed

Mechanical & General:

• Size 201 x 98 x 52 mm (with holster)
• Weight 355 g
• Weigh With Holster and Flex-Stand 624 g
• Display Digital: 19,999 counts in high-resolution mode
• Analog: 32 segments, updates 40/sec.
• Frequency: 19,999 counts, updates 3/sec at > 10 Hz.
• Battery Life Alkaline: ~400 hours typical, without backlight
• Shock 1 Meter drop per IEC 61010-1:2001
• Vibration Per MIL-PRF-28800 for a Class 2 instrument

• True-rms ac voltage and current for accurate measurements on non linear signals
• Selectable filter for accurate voltage and frequency measurements on motor drives
• 0.05 % dc accuracy
• 6000 counts, 3-3/4 digits
• 4-1/2 digit mode for precise measurements (20,000 counts)
• Measure up to 1000 V ac and dc
• Measure up to 10 A, 20 A for up to 30 seconds
• Built in thermometer lets you carry one less tool (TC probe included)
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity and diode test
• 10,000 µF capacitance range for components and motor caps
• Min/Max-Average recording with Min/Max Alert to capture variations automatically
• Peak capture to record transients as fast as 250 µs
• Relative mode to remove test lead interference from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Touch Hold to capture stable readings avoiding noisy signals
• Large display digits and two-level bright white backlight for increased visibility
• Analog bargraph for fast changing or unstable signals
• Input Alert provides audible warning against wrong use of input jacks
• Improved selectable sleep mode for long battery life
• Access door for fast battery changes without breaking the calibration seal
• "Classic" design with new removable holster with built in test lead and probe storage